use clone brush or paint bucket with pattern

You think you have found a bug ? You've got a suggestion to modify PhotoFiltre ? /
Ĉu vi opinias vi trovis malbonadĵon ? Ĉu vi havas sugeston por modifi PhotoFiltre ?

Modérateur : Modérateurs

Marga
Habitué(e)|Habitué|Habituée
Habitué(e)|Habitué|Habituée
Messages : 68
Inscription : 09 juil. 2005 9:58
Version de PhotoFiltre : PF and PFS
Système d'exploitation : W7
Mémoire RAM : 3
Localisation : Zwolle, Holland

use clone brush or paint bucket with pattern

Message par Marga »

Can I use a selected pattern in the clone brush or paint bucket..??
Or can I only use it via Edit....fill with pattern on a selection??
Greetings from Holland,
Marga
Antonio
Administrateur(trice)|Administrateur|Administratrice
Administrateur(trice)|Administrateur|Administratrice
Messages : 12874
Inscription : 28 oct. 2003 22:49

Message par Antonio »

yes you can, but you need before define the pattern with [Edit > use as pattern]
sylvey
Modérateur(trice)|Modérateur|Modératrice
Modérateur(trice)|Modérateur|Modératrice
Messages : 3899
Inscription : 23 mai 2004 6:45
Version de PhotoFiltre : studio
Système d'exploitation : windows XP
Processeur : AMD ATHLON XP2800
Mémoire RAM : 512
Localisation : sud de la france

Message par sylvey »

:wink: hello! you can choose any pattern, and open it as a picture, then clic on, "bewerken",then "patroon selecteren"...after you can fill with the paint backet (or you can clic on "bewerken", then on "vullen met patroon"...If you want to use the clone brush, your pattern must have a size 2X more than the number written under "straal".... Is it ok for you? :wink:
the best for you is :
http://photofiltre.jeroendebruijn.nl
:wink:
Marga
Habitué(e)|Habitué|Habituée
Habitué(e)|Habitué|Habituée
Messages : 68
Inscription : 09 juil. 2005 9:58
Version de PhotoFiltre : PF and PFS
Système d'exploitation : W7
Mémoire RAM : 3
Localisation : Zwolle, Holland

use a pattern in the fill bucket of clone tool

Message par Marga »

Dag Jeroen,
als het mag even in het NL:
1. ik maak een nieuw bestand
2. ik selecteer een patroon - zeg JA bij dialoogvenster
3. ik maak een selectie op nieuwe bestand
4. ik activeer vulemmertje
5. Krijg ik de Voorgrondkleur en NIET het patroon

is dat bij jou dan anders,,??

Groeten, Marga
http://www.oudje.nl/pf
MightyKitten
Membre d'honneur
Membre d'honneur
Messages : 42
Inscription : 29 mars 2004 22:01
Version de PhotoFiltre : 6.1.1 NL / 7.0.1 NL
Système d'exploitation : Windows XP Pro/SP2
Processeur : Pentium IV @ 2,66 Ghz
Mémoire RAM : 704 MB
Localisation : Netherlands

Message par MightyKitten »

Thansk Sylvey for mailing me... As I posted at the moderators forum group, I've been bussy oflate... so my visits to this fine forum are rather infrequent, at leasat for the moment, I hope.

Hallo Marga,

Je bent op het Engels /Franse forum terecht gekomen...
Gelukkig maakte sylvey me er op attent.


Als het goed is krijg je na de eerste twee stappen een niew vel, compleet gevuld met het geselecteerde patroon.

Nadat je bij 3 een selectie heb gemaakt,
kies je uit het menu "Bewerken" >> "partoon selecteren"
Wanneer je daarna verdergaat met stap 4 zou alles moeten werken.

Groeten,

Jeroen
Marga
Habitué(e)|Habitué|Habituée
Habitué(e)|Habitué|Habituée
Messages : 68
Inscription : 09 juil. 2005 9:58
Version de PhotoFiltre : PF and PFS
Système d'exploitation : W7
Mémoire RAM : 3
Localisation : Zwolle, Holland

use a pattern in the fill bucket of clone tool

Message par Marga »

Hoi Jeroen, NEE dus...
Zou je de moeite willen nemen de volgende stappen eens uit te voeren in PF:
1. nieuw bestand
2. dubbelklik op een patroon in de verkenner (onderaan ) om te selecteren
3. Klik in dialoogvenster Bevestig op Ja
4. Nu zou volgens jou het vulemmertje moeten werken mét patroon
5. net zoals dus ook het kloonpenseel
6. Bij mij dus niet... ook niet als ik een selectie op het bestand maak.

Bij voorbaar dank voor meedenken.. ik zit over twee welken met een klas cursisten en moet dit dus echt weten....
Groeten, Marga
http://www.oudje.nl/pf


[/list]
Marga
Habitué(e)|Habitué|Habituée
Habitué(e)|Habitué|Habituée
Messages : 68
Inscription : 09 juil. 2005 9:58
Version de PhotoFiltre : PF and PFS
Système d'exploitation : W7
Mémoire RAM : 3
Localisation : Zwolle, Holland

use a pattern in the fill bucket of clone tool

Message par Marga »

Hoi Jeroen, ik heb het gevonden.... was vergeten "met patroon" aan te vinken.... :oops:
Groeten en bedankt, Marga

Idee om http://www.oudje.nl/pf op te nemen bij je links..???
Jaume44
Régulier(ère)|Régulier|Régulière
Régulier(ère)|Régulier|Régulière
Messages : 448
Inscription : 09 mars 2005 21:42
Version de PhotoFiltre : Studio 10
Système d'exploitation : w7
Processeur : Pentium (R) Dual Core
Mémoire RAM : 4 GB
Localisation : Spain

Clone Tool

Message par Jaume44 »

Marga,

If you wish to use a pattern as the product of the clone tool, you may

select an area of your current work, click on edit > define pattern (patroon),
then select your clone tool checking the pattern (patroon) box.

You may also open a separate pattern of choice and do the same as above. These instructions apply to Studio.

You may do the same in PhotoFiltre 6.1, however you must select your pattern and define it first, otherwise the clone tool option box for using pattern (patroon) will not activate.

I hope this is of some help.

Jack